Smooth-Cast™ 300 is Nanric's top pick for positive mold making of the equine hoof in conjunction with our Advanced Cushion Support™.

NANRIC Advance Cushion Support can be used to make a negative mold of your horse's feet.  In less than 15 minutes, a positive 3-D model can then be created by pouring Smooth-Cast 300 into the negative ACS mold.
 
Dr. Redden developed this technique for creating a diagnostic cast as a communication tool.  His detailed shoeing and trimming protocol can be placed into the hands of farriers and veterinarians throughout the world.
 
The 3-D model simplifies the communication among professionals and bridges the language barrier.  Dr. Redden often makes a diagnostic cast once optimum mass and balance have been reestablished in competivitve horses.  This serves as a baseline for future farrier reference.  Kit available in 2 - 16 oz bottles or 2 - 1 gallon bottles.

The Smooth-Cast™ 300 Series of liquid plastics are ultra-low viscosity casting resins that yield castings that are bright white and virtually bubble free. Vacuum degassing is not necessary. They offer the convenience of a one to one mix ratio (one part A to one part B by volume). The differences between them are pot life and demold time. These resins readily accept fillers (such as URE-FIL 3 from Smooth-On) and can be pigmented (Smooth-Cast 325 accepts pigments better than the SC 300 series). Fully cured castings are tough, durable, machinable and paintable. They resist moisture and mild solvents.
 
Applications for Smooth-Cast Liquid Plastics also include reproducing small to medium size sculptures, cold cast bronze castings, making prototype models, roto cast pieces, special effect props and decorative jewelry.